Everything is bigger when it comes to SUV (RAV4) maintenance.
The suspension, brakes, tires, and oil filters are bigger and more durable than those on a regular automobile. Vehicle weight and ride height are increased due to this overbuilt structure.
Because of this, a typical automobile jack might not be adequate.
In this article, find out which floor jacks are the best for your RAV4!
How to Choose the Floor Jack?
The mechanical benefit of hydraulic jacks intrigues us. We can carry literally much more than we could on our own with a bit of ingenuity and physics. So what is the finest floor jack for your job, then?
The first thing is to select a proper material.
Steel is more expensive but more cost-effective and heavier.
Aluminum is cheaper and lighter, but it won’t last as long.
And lastly, a hybrid that takes the best of both worlds by combining steel and aluminum components.
The next thing you have to do is select an adequate capacity.
On the label inside your door or in your car’s handbook, you may find your vehicle’s gross vehicle weight and the front and rear weights.
Also, make sure you get more lifting capacity than you require.
Ensure to avoid going overboard since the jack will be slower and heavier the more extensive the capacity.
How Much Does a RAV4 Weigh?
Since we asked you above to check the gross weight of your RAV4, here are the answers so you don’t have to look for them. Of course, make sure that the information is accurate for your model.
We will take a 2022 Toyota RAV4 as an example.
Because there are multiple powertrain options for each trim level of the 2020 Toyota RAV4, each trim option has a varied weight.
First, the front-wheel-drive RAV4 LE weighs 3370 lbs.
The LE’s curb weight with all-wheel drive is 3490 lbs.
The XLE is the next available model, weighing 3380 lbs in FWD and 3490 lbs in AWD.
The XLE Premium weighs 3380 lbs for FWD and 3490 lbs for AWD, the same as the XLE.
At 3615 pounds, the 2020 Toyota RAV4 Adventure is heavy. At 3655 lbs, the TRD Off-Road weighs a little bit more.
To finish, the RAV4 Limited weighs 3620 lbs in its AWD form and 3485 lbs in its AWD option.
Which Floor Jacks Can You Use on the RAV4?
Now that we know how much RAVs weigh, we can showcase the best floor jacks, with links to where you can get them.
The heaviest RAV4 above is at 3655 lbs. That is around 1.81 tons, meaning you cannot use a floor jack with a capacity below 2 tons.
Let’s see what is on offer!
#1 Floor Jack for RAV4: Blackhawk B6350
The Blackhawk Fast Lift Service Jack is an excellent option for anybody searching for a floor jack for their RAV4 vehicle.
The jack has a broad swiveling saddle and heavy-duty steel structure, making it an excellent choice for lifting overbuilt components.
Additionally, this jack includes two swiveling wheels for simple steering and a long handle with a rubber grip for less effort while moving it about a shop.
With a lift range of 5.5 inches to 22 inches, the Fast Lift Service jack can lift any vehicle or SUV.
The big 4-inch saddle’s ability to rotate might help locate the ideal lifting position.
Additionally, it includes a Fast Lift function that speeds up the lifting process by enabling the jack to get to the jacking point with just a few strokes.
It is a hydraulic floor jack with a height range of 22 inches and a weight capacity of 3.5 tons.
#2 Floor Jack for RAV4: Powerbuilt 3 Ton All-in-One Hydraulic Bottle Jack
Budget-conscious home mechanics are constantly seeking multipurpose gear that will help them save money.
The Powerbuilt All-in-One precisely does that.
A 6,000-pound car can be lifted with this bottle jack and jack stand combo, which can also be used to secure the vehicle in place.
With a lifting range of 11 and 21 inches, the Powerbuilt All-in-One has more than enough room to elevate nearly any vehicle or SUV from its original height.
It features a lift arm specifically created with several locking points for rapid lifting and anchoring the jack. And since it weighs just 22 pounds, you can store it in a toolbox or car trunk for roadside maintenance.
It is a hydraulic bottle jack with a height range of 11 to 21 inches and a weight capacity of 3 tons.
#3 Floor Jack for RAV4: Arcan 3-Ton Quick Rise Aluminum Floor Jack
Consider checking out Arcan’s 3-Ton Quick Rise Aluminum Floor Jack for a lightweight improvement. This jack is made of lightweight aircraft-grade aluminum and weighs only 56 pounds.
Additionally, this jack offers a lifting range of 3.75 inches to 18 inches, which is sufficient for most SUVs and light-duty vehicles.
Additionally, a counterweight pawl that is dropped into position during jacking prevents this jack from automatically dropping.
Dual pump pistons on this floor jack make raising the car quicker and simpler. The Arcan incorporates a long reinforced handle with a cushioned part to prevent car damage.
This jack features a large footprint for stability under load and a rubber saddle pad for keeping a firm hold on the jacking point.
Overall, it is a manual floor jack with a height range of 3.75 to 18 inches and a weight capacity of 3 tons.
Frequently Asked Questions
Now let’s answer some of the most asked questions online about SUVs, RAV4s, and floor jacks!
Does a Toyota RAV4 Have a Jack?
Most cars come with a floor jack nowadays. The same goes for the RAV4.
Open the back liftgate and search for a looped tab in the center of the floor directly next to the entrance to reach the tire jack.
The middle of the tire contains the tire jack. There you go!
Can I Use a 3-ton Jack on an SUV?
Yes! Most SUVs can be lifted with a 3-ton floor jack.
Even if the car weighs more, you lift only one end, which is more accessible than the entire vehicle.
How Do You Jack Up a RAV4 2021?
It is very simple! If you already do not know how to jack up your RAV4, check it out here!
How Big of a Jack Do I Need for My SUV?
A two-ton jack should be adequate for elevating a corner on most sedans and compact automobiles.
To provide you with the necessary margin of safety, a pickup truck or SUV may need to be rated at double that weight (four tons).